CONCRETE WASHOUT
Concrete Washout solutions, to allow concrete equipment to be washed off safely onsite.
 |
|---|
 |
 |
 |
 |
 |
The ‘Ultra’ incorporates a high volume pump to supply optimum hose pressure for washoff and auto pH control (CO2).
Concrete equipment can be safely washed off onsite. Solids are separated from the wash water and retained within the Adsorption Sack. The remaining water is then continuously recycled and pH is automatically neutralised by CO2.
_edited.jpg)
Increased waste capture and water storage capacity. Optimum hose pressure and auto pH Control. 2 x 1tonne capacity Adsorption Sacks and 2000ltr of water storage capacity. ENQUIRE NOW FOR MORE INFO.
Predominantly designed for small tools, the ‘MINI’ is an easy to use, portable concrete washout.
Concrete equipment can be safely washed off onsite with this mobile washout. Solids retained, water recycled and pH easily neutralised.
Contact us on 01889 508944 or
email info@kellytanks.co.uk for more info
Captures Solids
Retains Solids in Adsorption Sacks
Requires 110V Power
Closed Loop
(re-uses water)
pH Control (minimal manual input)
Auto pH Control
Concrete Washout Sacks
Adsorption Sacks - Sacks enable retention of solids, cementitious particles and oil residue, whilst allowing water to drain. Ideal for washing concrete equipment off into and other onsite waste disposal.
Can also be used to empty settlement tank and filter waste water.
WARNING
Using inferior filter sacks (ie. builders tonne bags) will not retain cementitious particles, these will later settle and solidify in pipes and pumps.
Adsorption enables solids to simply attach to the surface of the liner, eventually becoming heavy enough to drop into the sack leaving the liner clear to continue filtering.
Left - inflow into Adsorption Sack. Right - outflow from Adsorption Sack.
